How to Burn Hex file Using AVR Studio

After successfully install Drivers of  USBasp programmer . Now transfer hex file using AVR Studio Software.

  1. Connect USBasp programmer to PC via USB cable
  2. Connect Microcontroller ATmega16 IC to USBasp Programmer.


  1. Open " cmd " command prompt 
  2. Type :  avrdude –p m16 –P usb –c usbasp
  3. Press the “Enter” Button on Keyboard


1.   Open " cmd " command prompt 
2.   Type :  avrdude –p m16 –P usb –c usbasp

3.   Press the “Enter” Button on Keyboard






1. Open AVR Studio Software
2.Go to  " Tools " option and click " External Tools "
3.type "Usbasp ATmega16 " in place of [new tools]

Title :           ATmega16 16Mhz

Command :   avrdude.exe

Arguments : 

-c usbasp -p m16 -U flash:w:

click  "  >  " on right side =  choose Target Directory

-c usbasp -p m16 -U flash:w:$(TargetDir)


click  "  >  " on right side =  choose Target Name 

-c usbasp -p m16 -U flash:w:$(TargetDir)$(TargetName)

Final Arguments :

-c usbasp -p m16 -U flash:w:$(TargetDir)$(TargetName).hex:i


Select: Use Output Window

Click:   Apply

Click:   OK





Price : Rs 259.00



  • MODEL NO.:  USBASP AVR PROGRAMMING DEVICE FOR ATMEL  PROCCESSORS
  • WEIGHT & DIMENSIONS: 25g
  • MATERIAL & COLOUR: NA & Blue
  • APPLICATION: Programming atmel processors.
  • PACKAGE INCLUDES : 1 x USB asp AVR Programming Device. 10 x Jumper Wires.

Product description

USB ASP AVR PROGRAMMING DEVICE FOR ATMEL PROCCESSORS is a
USB in-circuit programmer for Atmel AVR controllers. USBASP AVR
PROGRAMMING DEVICE FOR ATMEL  PROCCESSORS simply consists of an
ATMega88 or an ATMega8 and a couple of passive components. 
The programmer uses a firmware-only USB driver;
no special USB controller is needed.